5 Best Hybrid Table Saw Under 1000 & 1500 Dollars Reviews

If you are a DIYer or a professional contractor a hybrid table saw is one you will want to add to your arsenal. These saws can cost anywhere between a few hundred dollars and more than $1500.

But you are here because you are looking to spend around $1000 on your hybrid table saw. That being said, we have tested and analyzed over 50 different hybrid table saw models. And from the 50 we narrowed down to the top five favorites.

We considered a number of things when making our selection, key among them power, safety features, and ease of handling. Based on these criteria we chose the DEWALT (DWE7491RS) Table Saw as our top pick.

It is one of the most powerful models out there with a no-load blade speed of 4800 RPM. Also, its wheeled stand means it’s easy to move. Overall, it is the table we liked the most, however, all the other saws on our list are pretty impressive.

With the best hybrid table saw under $1000 you can do any heavy-duty work. Hybrid table saws are powerful enough for heavy-duty tasks. More importantly, they lack the hefty price tag of their cabinet saw counterparts.

in a glance of our top budget hybrid table saws Under $1500

best hybrid table saw under 1000 Reviews

DEWALT (DWE7491RS)Table Saw

DEWALT 10-Inch Table Saw, 32-1/2-Inch Rip Capacity (DWE7491RS)

Key Features
  • 15 amp motor
  • 2.5-inch dust port
  • 26.25 x 22-inch tabletop
  • 3.125-inch max cut depth
  • 31 x 31 x 24.5 in. dimensions
Our Top Pick

At first glance, the Dewalt (DWE7491RS)  table saw looks like your typical job site table saw. However, a closer look reveals that it is bigger and heavier than most portable Jobsite table saws.

Its impressive performance is highlighted by its 3.125-inch maximum cut depth and a 32.5 inch RIP capacity. This saw performed well and had no issues ripping 5/4 inch decks. It also fared well when presented with plywood and other board sizes.

One of the major problems of portable saws is that they tend to vibrate a lot and can be unstable without a solid stand. Thus it is fantastic to see that Dewalt included a stand with this table saw.

It features a pretty handy rack and pinion fence. Not only is it easy to use and adjust, but it is also accurate. And while it does come with a miter gauge included, we would not recommend you use it.

The miter saw is one of the few drawbacks of this impressive hybrid table saw. As mentioned earlier, it looks more like a portable table saw than a cabinet saw. And its 90-pound weight is reflective of this.

What we liked

Things we didn't like


It is relatively small compared to other hybrid table saws, but it delivers exceptional plenty of power. This saw has excellent power and can handle most cutting and ripping tasks. Given its features, it is the best hybrid table saw from Dewalt.

Makita 2705X1 Table Saw

Makita 2705X1 10-Inch Contractor Table Saw with Stand
Key Features
  • 15 amp motor
  • Aluminum cast tabletop
  • 3-⅝ inches cutting capacity at 90 degrees
  • 10 inch 32 teeth carbide-tipped blade
  • 4800 no-load blade speed

When compared to the other two saws we’ve already reviewed, the Makita 2705X1 has many of the same performance features. However, this unit excels in some areas, key among them safety features.

What attracted us to this unit was the safety features and ease of use. It sports the same 15 amp powerful motor as most of its competitors. And also the same no-load blade speed of 4800 RPM. Thus it had no problems ripping through 4×4 material.

However, this has a few tricks up its sleeve. For starters, thanks to its right extension table, it can handle ripping up to 4×8 sheets of plywood. And its 25-inch rip capacity is still impressive in this price range.

The safety features department is where this unit excels. It boasts a blade guard with a cam lock that offers protection and makes it easy to remove the blade. Also, it has anti-kickback pawls as well as a riving knife to protect you in case of a kickback.

What we liked

Things we didn't like

our verdict

This table saw is highly rated and is considered one of the best contractor table saws on the market. It has many of the features you would expect from a table saw. It is powerful and can handle a lot of tasks.

Shop Fox W1837 2 hp Open-Stand Hybrid Table Saw

Shop Fox W1837 10' 2 hp Open-Stand Hybrid Table Saw

Key Features
  • 4-inch dust port
  • Cast iron tabletop
  • 2Hp single-phase motor
  • Quick-release blade guard release
  • 30-inch rip capacity to the right and 15-inch rip capacity to the left

Shop fox has managed to break through a market dominated by more famous brands such as Bosch and Dewalt. And one of the company’s best sellers is the W1837 hybrid table saw.

Weighing 243 pounds, it is relatively bulkier than your average Jobsite table saw. However, it is more lightweight than your average cabinet table saw. Also, its weight means it’s more stable than any portable table saw out there.

Measuring 40-¼-inch x 27-inch, the cast-iron tabletop is also of better quality than the aluminum table tops that are predominant in portable saws. Furthermore, it produces minimal vibrations.

But how does it perform in the material cutting department? A 2HP belt-driven induction motor powers it. With this powerful motor, you get a right RIP capacity of 30 inches and a left RIP capacity of 15 inches.

This is more than enough RIP capacity and cutting power for most average cutting tasks. Apart from having a powerful motor, though, it can also run on either a 240v or 120v power source. This makes it a versatile saw to have.

What we liked

Things we didn't like


This table saw offers excellent value for money. It is a Rigid  table saw that performs excellently. As with all other hybrid table saws, it provides the best of both worlds. It is not as heavy as a cabinet saw, but it has a solid construction better than that of portable saws.

Grizzly Industrial G0899 Hybrid Table Saw With Riving Knife

No products found.

Key Features
  • 2 HP motor
  • T-slot miter gauge
  • 4000 RPM arbor speed
  • 34-1/4 inch table height
  • 31-1/2 inch RIP capacity at the right
  • 3-1/8 inch max depth of cut at 90 degrees
best under $1500

From the cheapest table saw, to the most expensive. The Grizzly Industrial G0899 will cost you a little bit more. Which begs the question, is it worth it considering all the other cheaper options available?

To answer this question, we must consider what the saw offers. One thing you will love about this is the cast-iron tabletop. Cast iron is a better material for making tabletops as it is more stable. On the G0899, the tabletop is placed at a height of 34-1/4″ inches.

This is comfortable to use. When it comes to power, it produces plenty of it thanks to the 2HP motor. This motor is powered by either a 120v or 240 single-phase electric current. With it, the saw can rip through thicker wood in a single pass.

The carbide tooth blade of the saw is another one of its great features. This type of blade rarely becomes blunt. There is also a 4-inch dust collection port integrated into the hybrid table saw. 

What we liked

Things we didn't like


It may be a bit costlier than other models on the list, but this is the best hybrid table saw under 1500. It is sturdy and can do most of the tasks that other cheaper models cannot. So if you want a saw that can help you do more, this is one you should consider.

RIDGID R4512 13-Amp Cast IronTable Saw

RIDGID R4512 10 in. 13-Amp Cast IronTable Saw

Key Features
  • 10-inch blade
  • 13 amp motor
  • Cast-iron tabletop
  • 3450 RPM blade speed
  • 30-inch rip capacity to the right

True to its name, the Ridgid R4512 table saw is designed to be a Ridgid tool. It has a cast-iron tabletop. While it is robust and sturdy, it is also mobile and is easy to move around in your workshop.

It weighs about 260 pounds, which is undoubtedly bulky. Fortunately, it has a wheelbase that makes it easy to move from one location to another. Thus it offers the perfect balance between portability and robust construction.

In terms of power, it cannot compete with larger and pricier table saws, but it churns out enough power for most basic tasks. At the core of its power is a 13 amp motor that produces 3.8 Horsepower that turns the blade at a speed of 3450 revolutions per minute.

One of its best features is the cutting capacity. At an angle of 90 degrees, it can cut up to 3.25 inches. And at an angle of 45 degrees, it has a cut depth of 2.25 inches. As for the RIP capacity, it has a RIP capacity of 30 inches to the right.

What we liked

Things we didn't like


This is a rigid table saw that is suitable for both professionals and beginners. It may not be ideal for heavy-duty projects but it is more than sufficient for most projects. Additionally, it is quite easy to use.

Rockwell RK7241S Table Saw with Laser

Rockwell RK7241S Table Saw with Laser

Key Features
  • 10-inch blade
  • 15 amp motor
  • Fold-out fence
  • Quick folding stand
  • 4800 RPM blade speed
  • 3 9/16 maximum cut depth at 90 degrees

One of the most affordable hybrid table saws on the market is the Rockwell RK7241s. But despite its price tag, this saw makes a pretty good case for itself. And proved capable of going toe to toe with its pricier competitors.

From the looks of it, it is a basic contractor saw. However, it has some unique features that differentiate it from other similar products. First up is the integrated laser. This is not a unique feature and is quite common in high-end models.

However, when you consider its price it’s pretty impressive that it offers an integrated laser. And if that is not enough, it is powered by a pretty decent 15 amp motor. What is more impressive is that the blade rotates at speeds of up to 4800 RPMs.

This is considerably higher than most contractor table saws. With it, you can easily RIP 4×4 sheets of lumber. And with a maximum cut depth of 3-9/16 inches at right angle, it can handle ripping other materials.

What we liked

Things we didn't like


This table saw is a cheaper alternative to some of the pricier models on offer. It has some features that surprised us. The integrated laser is one of them. Overall this best budget hybrid table saw on the list.

What's a "hybrid" table saw?

So what exactly is a hybrid table saw? This is a question that has probably crossed your mind more than once. By definition, a hybrid table saw is a cross between a cabinet saw and a traditional contractor saw or a portable Jobsite saw.

Cabinet saws are large, bulky, and powerful, and most run on a 240v circuit. These saws usually have the trunnions and the saw mechanisms mounted directly onto the cabinet base.

Hybrid table saws, however, have the saw mechanisms bolted under the cast iron tabletop. These saws usually have fully enclosed stands with the motor inside instead of at the back like in a contractor saw.

contractor table saw vs. "hybrid" table saw

Contractor table saws are the cheaper and less powerful of the two. These table saws are usually portable, making them ideal for job sites. However, they offer less power and will struggle to rip through denser timber.

Hybrid table saws offer more power and are heavier than contractor table saws. They provide improved performance and power without the price tag of a cabinet saw. If you are a DIYer or a contractor who is always on the move, the contractor saw is ideal.

However, if you deal with denser pieces of lumber, you will be better suited with a hybrid table saw.

Why do you need a hybrid table saw

What To Consider Before Getting Best table saw for under 1000

A hybrid table saw is an investment, and as such, it is essential you know what to look out for when shopping for one. So what are some of the things you should consider when looking for the best hybrid table saw under 1000?


How plenty of power do you need in your hybrid table saw? Well it all depends on the kind of work you are involved in. Most DIYers will find a 1.5 Horsepower table saw more than sufficient. However, if you handle industrial projects involving denser material, you may need more power.

Some models offer up to 3 Horsepower, which is sufficient for most industrial grade work. However, it is important to note that more power equates to a higher price.

Input voltage

Hybrid table saws are majorly corded power tools. Meaning you require a power outlet to plug them into. Some saws will need a 220v power outlet while others can use both a 120v and a 220v power source.

The best hybrid table saw for the money is the one that offers both options. Thus if you have a 110v power source, you can plug it in. On the flip side, if you use a 220v power source, you can also plug it in.

Nonetheless, since most homes use 110 power outlets, a 220v only table saw will not be ideal.

Safety features

As with any other power tool, hybrid table saws pose a threat to users. And a hybrid table saw related accidents can be fatal. To protect users in case of accidents, most table saws feature a variety of safety features.

A riving knife is one of the safety features to look out for. It sits behind the blade and is attached to the same mechanism as the blade. The primary purpose of this knife is to minimize the risk of kickback.

Anti-kickback pawls are used in conjunction with a riving knife. They are attached on either side and also serve to minimize the risk of a kickback. These features help make your table saw safe to use.

Belt drive vs. direct drive

The motor is responsible for the speed at which the blade of a table saw spins. Generally, there are two motor and blade configurations available, belt drive and direct drive. Belt driven saws offer more torque and longevity.

In the belt drive configuration, the motor is further away from the blade and does not collect a lot of dust. Belt drive saws are, however, noisier, and the belts tend to require a lot of maintenance. Direct drive saws are quieter.

Therefore it largely comes down to your needs. All the same, if you are a DIYer, a direct drive configuration will be a better option.


This may not be an essential factor for everyone. All the same, mobility is one of the things that differentiates contractor saws from hybrid table saws. If the ability to move a table saw is essential to you, then consider a saw that has a wheelbase.

Most hybrid table saws weigh between 90 and 500 pounds and are thus challenging to move around.

Frequently Asked Questions

Can The Best Hybrid Saw Run On A 120v Power Outlet?

Hybrid table saws are not as powerful as cabinet saws. As such, most hybrid table saws can run on a domestic 120v power source.

How Do I Deal With Dust From A Hybrid Table Saw?

As with any other saw, the number one nuisance is sawdust. Most hybrid table saws feature a dust port that is used to direct the sawdust away from your work area.

What Safety Features Should The Best Hybrid Saw Have?

Safety is essential when dealing with any type of power tool, and the hybrid table saw is no exception. The primary safety features to look out for are a riving knife and a blade guard.

Which Is The Best Hybrid Table Saw?

There are very many excellent hybrid table saws out there, but if we had to choose the best from our list, we would have to go with the DEWALT (DWE7491RS). It offers the perfect balance between portability and power.


Generally, the best hybrid table saw depends on your needs and intended use. Also, it will depend on how much you are willing and able to pay. Some products are pricey, while others are affordable.

But overall, you can get a decent product for less than $1000. If you factor in all the things we have stated above, you should be good to go.

Last update on 2021-03-08 / Affiliate links / Images from Amazon Product Advertising API