Jointers come at all sizes and prices. Question is which is best suited to your needs? There is no one universal jointer that is ideal for everyone. If you are a hobbyist or own a small shop and cannot accommodate a large power tool a six-inch jointer is ideal.
Six-inch jointers offer plenty of power without being overly large or bulky as to become an inconvenience. There is a large selection of six-inch jointers available on the market for you to choose from.
Problem is not every one of these jointers will suit your needs. And since you want nothing but the best 6-inch jointer it helps to know which features make up the best jointer. These are features such as cutter head speed, table size, and power.
Below I have compiled a list of six 6“ jointers that fulfil the criteria of the Best 6 inch jointer. I have picked these five based on their performance, affordability, and ease of use.
Best 6 inch jointer Reviews
Powermatic 1791317K 54HH 6-Inch Jointer with helical cutter head
- 1 horsepower motor
- 38 inch cast iron fence
- 66-inch long cast iron table
- Helical cutter head with three knives
- 6-inch long adjustable outfeed and infeed table
Reliable and dependable these are the adjectives I would use to describe the 54HH 6-inch jointer from Powermatic. It has a narrow design meaning it will not take up too much space in your workshop or garage. But that’s not the only thing it has going for it.
The table of this jointer is supported by a 32 inch long and 21-inch wide steel base. This base offers good stability and also puts the table surface at a comfortable height. When it comes to power it is powered by a 1Horsepower motor.
From its name, it is easy to deduce what kind of cutterhead it comes with. The helical cutter head has three knives. The knives are made from high-quality steel and so are all the other parts of the jointer with the exception of the table.
The table is fashioned out of cast iron and measures 66 inches long and 7 ¼ inches wide. Thus you get sufficient surface area for long pieces of lumber. It is possible to adjust the height of both the infeed and outfeed tables.
Priced at slightly over $100, this is a reasonably priced tool that works well in small workshops. The base has wheels which make it easy to move around despite its over 100-pound weight. Also, it delivers on all other aspects including power.
Powermatic 1791279DXK 54A Deluxe 6-Inch Jointer
- 1 horsepower motor
- 32-inch long steel stand
- Cutter head with three knives
- 66- by 7-¼-inch table surface area
- Cast iron fence with stops at 45 and 90 degrees
One of the most highly rated 6-inch jointers is the Powermatic 1791279DXK 54A Deluxe 6-Inch Jointer. It boasts of several features that would earn it a spot on any best 6-inch jointers list, mine included. So what exactly does it offer?
Similar to its previously reviewed counterpart it features a 1 horsepower motor. The latter provides just enough power to cut through softwoods, hardwoods and even exotic woods. As for its cutter head, it features three knives as well.
One fantastic thing about this jointer is how easy it is to replace or change the blades. But this isn’t the only good thing about it. A 66-inch table supported on a 32-inch long steel base provides plenty of room for almost any kind of task.
For security purposes, it also comes with a lockable switch. The latter is efficient at preventing accidental switching on of the jointer. As for the fence, it is made from cast iron and has positive stops of 45 degrees and 90 degrees.
Yet another great jointer from Powermatic, it is powerful enough to handle softwoods and hardwoods. Additionally, it boasts of a long table capable of accommodating extra-long pieces of lumber.
Delta 6" Bench Top Jointer 37-071
If you are on a strict budget then the 6″ Bench Top Jointer 37-071 is one you should consider. It is one of the more affordable 6-inch jointers available. However, its low price tag does not mean it’s a poor performer.
On the contrary, this is a great option for small scale workshops. It runs on a 12 amp motor and churns out 10,000 RPMs of cutter head speed. Speaking of the cutter head, unlike the other two reviewed above this one has two knives.
Nevertheless, it is to be expected given its price tag. Combined the two knives are capable of making 20,000 cuts per minute, which is mighty impressive. Being a small budget option, it does not have a long table like some of the other jointers on the list.
Its 28.5-inch long table is actually dwarfed by some of the other options available. However, the smaller table works in its favor. It means you can easily fit it inside your small workshop without the need for additional space.
It’s cheap and more lightweight than many of its pricier competitors. And this is exactly what gives it an edge over the competition. It is small enough to fit into most small workshops. At the same time, it is powerful enough to handle softwoods and hardwoods.
PORTER-CABLE PC160JT Variable Speed 6" Jointer
Another budget option is the PORTER-CABLE PC160JT Variable Speed 6″ Jointer. Compared to other jointers the price you pay for this feels like peanuts. And the best part is that it can hold its own against other pricier models.
As with any other budget jointer, this one comes with two knives in its cutter head. The cutter head itself has a variable speed of 6,000 and 11,000 RPMs. This means you can adjust the speed of the cutter head to suit the type of lumber you are working with.
As for the knives they can deliver between 12,000 to 22,000 cuts per minute. This all is made possible by a 10 amp 1.4 horsepower motor. Compared to some of its budget competitors its 30-inch table is quite long.
Replacing the knives is easy and so is adjusting the fence of this Porter-cable 6 inch jointer. The fence itself is made from tough cast iron.
Despite its size and price, it does deliver excellent performance. It is pretty powerful for its price as well. Overall, it is an exceptional jointer that is priced just right. There are many other pricier options but for the budget-conscious buyer, this is one of the best.
JET 708457DXK JJ-6CSDX 6-Inch 1 HP Jointer with Quick-Set Knive System
- 237-pound weight
- 1 Horsepower motor
- 31-1/4 high steel base
- Three knife cutter head
- 55-3/4 x 7-3/8 cast iron table
The Jet JET 708457DXK JJ-6CSDX is a great option for home use. While it isn’t the most lightweight on the market it does deliver exceptional power and performance. It is thus ideal for a wide range of projects
At the bottom of the jointer are tabs on each end. These help you secure it to the ground for improved stability. But even without the tabs, it is a very stable jointer thanks to its steel base. This base supports the table of the jointer that is 31-1/4 inches high from the ground.
This is a pretty comfortable height to work with. The table measure 55-3/4 x 7-3/8 meaning it is large enough to accommodate large pieces of lumber. As for the cut capacity, it has an impressive cut capacity of 6-1/16 x ½.
The source of its power is a 1 horsepower motor encased within the steel base. The motor gives the cutter head a spin speed of 6000 rpm. This speed is the right balance between material removal and cutting speed.
For a home workshop, it is one of the best. Though it is quite bulky, its features and performance make it an ideal option for most. It has all the features you would expect from this kind of a jointer.
Shop Fox W1829 Benchtop Jointer, 6-Inch
According to Shop Fox, its products are built to last. And this can be seen clearly in its Shop Fox W1829 Benchtop Jointer, 6-Inch jointer. This unit has a solid construction but doesn’t have the same price tag that other similar products come with.
At the core of this jointer is a 12 amp motor. The latter powers a cutter head that spins at 10,000 RPMs. The two knives of the cutter head, on the other hand, can make 20,000 cuts per minute. This is in addition to the heavy-duty cast iron table it comes with.
There is also a cast-iron fence that can be adjusted to 45 degrees as well as 90 degrees. When jointing wood you can clean up easily with the included dust port connector. This dust port connector has a filter chute that can be connected to a galvanized trash can.
The infeed can be easily adjusted. Overall it weighs about 80 pounds. It may seem like a heavy jointer but considering some weigh up to 250 pounds it is not all that heavy.
Last but definitely not lease, this is the perfect option for small shops. It is an affordable jointer and does not require a lot of space. It also delivers plenty of power for handling many different kinds of projects.
How to choose the Best 6“ jointer
While shopping for a 6-inch jointer there are several factors to consider. These are;
The top surface area of a jointer is what is referred to as the table. It comprises of the infeed and outfeed table. The length of this surface will determine the size of lumber a jointer can handle. In my experience, it is always recommended to work with lumber that is not more than double the length of the table.
As such, if you mainly handle 6-inch lumber in your workshop then a table with a length below 36 inches will not be ideal. When selecting a jointer for purchase it is important to consider the size of its table vis-a-vis the size of lumber you handle.
Width of table
The width of the jointer is as important as its length. Ideally, the width of the jointer table should match the width of the lumber you use mostly. A six-inch jointer is perfect for 2 by 4-inch boards. However, 6-inch jointers do not do well with wider 2 by 6 boards.
For handling 2 by 6 boards you will be better served by an 8-inch jointer. Therefore, when shopping for the Best 6 “jointer it is important to consider the width of lumber you use. In some cases, you may be forced to the best 12-inch jointer.
Maximum cut depth
The maximum cut depth is determined by the difference in height between the outfeed and infeed table. The maximum cut depth of a jointer can vary from 1/8 inches to ½ inches. A depth of cut less than 1/8 inches may be ideal for improved control and a smooth finish.
As such, for 6-inch jointers, a maximum depth cut of 1/8 inches will be ideal.
The cuts per minute
The cuts per minute are how many cuts the cutter head knives can make in a minute. Usually, this number is gotten from the cutter head speed and number of knives it has. In this regard, a 6000 RPM cutter head with three knives will produce 18,000 cuts per minute.
Ideally, the higher the number of cuts per minute the better the finish. However, increased cuts per minute results in a shorter life span for the knives.
Number of cutter head knives
Most 6 inch jointers offer two or three knives in the cutter head. A cutter head with three knives stays sharper for longer than one with two knives. However, triple knife cutter heads tend to be pricier. Thus, it comes down to your budget.
Type of cutter head
There are two main types of cutter heads you can get in a jointer a straight knife and a helical cutter head. The former is the cheaper of the two. However, the latter is the better of the two. Also, a helical cutter head is less noisy. Helical cutter head jointers are pricier. As such it comes down to your spending ability.
One of the most important factors to consider is the motor. This is a jointer’s powerhouse and is responsible for its performance ability. Most 6 inch jointers come with a 1-2 Horsepower motor. A 2 Horsepower motor offers more power, however, a 1 HP motor is still sufficient for most tasks.
Benefits of using a jointer
Safety Tips on using a jointer
There are very many different 6-inch jointer models available on the market. Some are large and bulky while others are lightweight and compact. The best 6-inch jointer ultimately though is the one that can best serve your needs.
The prices of these models also vary depending on the features offered. The most expensive jointers are not necessarily the best though. As such, you can still enjoy the benefits of a quality 6-inch jointer even on a strict budget.
In conclusion, the above-reviewed jointers are best suited to handling wood that is 6 inches wide. For larger pieces of lumber, you may be better served by either an 8 inch or 12-inch jointer. The latter jointer sizes do not come cheap though.
Last update on 2020-03-26 / Affiliate links / Images from Amazon Product Advertising API