Best 14 Inch Bandsaw: 2020’s Best Bandsaw For Woodworking

best 14 inch bandsaw

As you probably already know, band saws aren’t cheap. If you have decided to invest in a band, saw then you know the value they offer. 

Some few years back only a handful of companies made band saws. Today, the market is flooded with a dizzying array of options. This has made it nearly impossible to pick out the best 14 inch bandsaw.

A 14-inch bandsaw is sufficient for most people, both professionals, and DIYers. Also, 14-inch saws are less costly compared to their 17-inch counterparts. Is that being said, which is the best 14″ bandsaw?

In this article, we have done the difficult work for you. We evaluated a wide array of 14-inch bandsaws and compiled a list of our top six. We picked these six based on several factors.

The main ones being table size, size of tabletop and fence. From these criteria, we selected the Jet 714400K JWBs as our top saw. It is cheaper than other options but offers more power and performance than many other similarly priced options.

All the same, each one of the models on our list will serve you well, and you shouldn’t dismiss them based on our top choice. 

Today's 6 Best 14 inch bandsaw Reviews

Jet 714400K Jwbs-14SFX, 14", Steel Frame Bandsaw : best bandsaw for woodworking

Key Features
  • 300 pounds weight
  • 116-inch blade length
  • 1-¾ HP single phase motor
  • 21-1/16″ x 17-⅛ inch tabletop
  • 4-inch diameter dust port
  • ½ inch blade width
Our Top Pick

Starting us off is the Jet 714400K JWBS bandsaw. This bandsaw combines exceptional resaw capabilities with solid construction. But these aren’t the only things that warrant its inclusion on this list.

A heavy-duty steel frame characterizes this saw. Weighing 300 pounds, it’s a stationary saw that will hardly be moved. However, that is a good thing. Its construction and weight give it exceptional rigidity.

Standing 40 inches from the floor, this is also quite a massive tool. As for the tabletop, it has a 360 square inches of work area. The large work surface is constructed using cast iron and is very flat.

With this bandsaw, you can make some bevel cuts as it tilts from 0 to 45 degrees. When it comes to power, it has a 1-¾ HP single phase motor. The latter delivers enough power to give the saw a resaw capacity of 13 inches.

What we liked

  • Comes with a 4-inch diameter dust port that can be connected to a vacuum
  • The motor has been prewired for a 115-volt power source making it ideal for home use as well
  • The saw is very rigid and has minimal vibrations
  • With its large work surface, it can be used to cut large pieces of lumber
  • Comes with a miter gauge for making miter cuts

Things we didn't like

  • This bandsaw is heavy
  • The tension assembly is not good at all

our verdict

This bandsaw is large, bulky and pricey, as you would expect any bandsaw worth its name to be. We struggled to find its drawbacks, and a glance at its online reviews reveals so did other users. This is the main reason we picked it as our best contender for the title of the best bandsaw for woodworking.

Delta 28-400 14 in. 1 HP Steel Frame Band Saw

Key Features
  • 1 HP motor
  • 40 ¾ inch table height
  • 1,620 FPM and 3,340 FPM blade speeds
  • Aluminum trunnion table support
  • 164 pounds weight

The Delta 28-400 is a typical bandsaw that is likely to take up plenty of space in your workshop. This begs the question, is it worth it? Well, when we compared to pricier models, this bandsaw is well worth the hassle.

In the construction department, it stays true to Delta’s legacy of producing high-quality tools. It is constructed from heavy-duty powder-coated steel. On top of this, it has an industrial-looking gray finish, that we absolutely loved.

But aesthetics alone aren’t enough to make anyone want to buy a bandsaw, right? Its polished cast-iron tabletop is large and very flat. It doesn’t come with a miter gauge, but there is a miter slot that accepts most standard miter gauges.

Above and below the table surface are ball bearing roller guides. The top roller guides are easy to adjust. The 1 Horsepower motor is dual voltage. Thus you can use it with either a 115v or a 230v power plug.

What we liked

  • The motor is dual voltage, and thus you can plug it to a 230v power source if more power is needed
  • Has a 1HP motor that is sufficient for most projects you will handle with a 14-inch bandsaw
  • The saw is very rigid and has minimal vibrations
  • Comes with a dust collection port that can be connected to a vacuum
  • The saw's aluminum blade wheels are easy to adjust

Things we didn't like

  • The blade on this saw does rattle a little
  • This saw doesn't come with a fence

our verdict

This bandsaw isn’t as expensive and as bulky as other options, which makes it an ideal option for home use. The fact that you can use it with either a 115v or a 230v power plug is excellent. Overall, this is a fantastic piece of cutting hardware.

WEN 3966T 14-Inch Two-Speed Band Saw with Stand

Key Features
  • 3-in-1 dust port
  • Mitre gauge included
  • 1480 or 3280 FPM blade speeds
  • 21-1/2 x 15-3/4 inch tabletop
  • Blade tension gauge
  • 9.5 amp motor

The Wen 3966T bandsaw proves that you don’t need to spend thousands of dollars to get a quality bandsaw. This is one of the cheapest bandsaws out there. So does it have what it takes to compete with its pricier models?

One thing we loved about this saw is the 9.5amp motor that can be tuned to run at two speeds. You can tune it to run at a speed of either 1480 FPM or 3280 FPM.

With this bandsaw, you can use blades of different thicknesses from 1inch to ⅛ inch. Meaning you can cut thick woods as well as intricate curved cuts. While it is offered at a relatively low price, it has a miter gauge, and a fence included in the package.

The saw can handle pieces of wood 8.85 inches deep and 13-⅜ inches wide. There is also a work light to illuminate the work table.

What we liked

  • Compared to other bandsaws this one is affordable
  • It offers a surprisingly deep cut for its price
  • Comes with a dust collection system built-in
  • Despite its price, it has a fence and miter gauge included in the package
  • Can be tuned to operate at speeds of 1420 or 3280 FPM

Things we didn't like

  • Might not be ideal for cutting thicker material
  • The dust port does not work great with a shop vacuum

our verdict

This bandsaw is for anyone looking for something affordable for occasional use. If you don’t have a lot of woodworking projects, this saw will suit you fine.

Grizzly Industrial G0555 - The Ultimate 14" Bandsaw

Key Features
  • 1HP motor
  • 210 pounds weight
  • 14x14 inch cast iron tabletop
  • 110v/220v dual voltage
  • 4 inches dust port

One of the most popular 14-inch bandsaws is the Grizzly Industrial G0555. The latter has some pretty spectacular features that are behind its popularity. Let’s take a closer look at this popular bandsaw.

The one feature that is to blame for its popularity is the deep throat depth of 13.5 inches. This is pretty generous and is better than what some other saws offer. In terms of cutting height, it has no problems cutting 6 inch high boards.

It has a 14 by 14 inches cast iron tabletop. This gives you some decent amount of working surface area. And since the blade can tilt 45 degrees to the right and 15 degrees to the right it is also a versatile saw

The 1 HP motor is powerful enough for most tasks. Also, you can plug this saw into either a 220v or a 110v power outlet.

What we liked

  • Runs on both a 110v and a 220v power plug
  • Has two-variable blade speeds 1500 FPM and 3200 FPM
  • This bandsaw produces no vibrations when being used
  • Features a rigid construction of steel, cast iron and
  • Features pop-open doors that give you easy access to the wheels and blade

Things we didn't like

  • Has no light feature to illuminate the working area
  • Some parts are not correctly aligned

our verdict

Some people have complained about it being expensive. However, when you consider its features, it is of the right price. It is an effective bandsaw that gets the job done with efficiency.

RIKON Power Tools 10-326 14" Deluxe Bandsaw

Key Features
  • 1 3/4 HP motor
  • 4-inch dust port
  • Adjustable RIP fence
  • 16x22 inch cast iron tabletop
  • 13 ⅝ inch wide cutting capacity
  • Quick-lock table trunnion system

The RIKON Power Tools 10-326 14 inch bandsaw is another that is priced over $1000. But when you consider its features, its price makes sense. So which features are these?

One of the essential features of a bandsaw is the tabletop. This RIKON model has an impressively large tabletop. It measures 16 inches deep by 22 inches wide. It can comfortably accommodate most large materials.

Next is the cutting capacity, and this one has one of the best cutting capacities around. It has a cut capacity of 13 5/8 inches wide and 13 inches high.

It also features a powerful 1-¾ HP motor with a dual voltage option. You can use it with either a 115v or a 230v power plug. And similar to other products of same price it comes with two blade speeds 2950 FPM and 1445 FPM.

What we liked

  • The saw has a large tabletop made from cast iron
  • The saw's wheels are well balanced and also made of cast iron
  • The on/off switch is prominent and protrudes out making it easy to use
  • Dual speed functionality means it can cut different types of materials

Things we didn't like

  • The instructions manual is not detailed enough
  • There is an adjustment knob near the fence that keeps falling off

our verdict

This is another high-end band saw that delivers on its promise. It has several useful features that make it the best 14 inch band saw for the money. Thus, while it is costly, it is well worth the cost.

JET JWBS-14DXPRO 14-Inch Deluxe Pro Band Saw Kit

Key Features
  • 12 inch resaw capacity
  • 1 ¼ inch HP single phase motor
  • 1500/3000 SFPM variable blade speed
  • The speed poly v belt drive system
  • 15 by 15 inch cast iron tabletop

We end our list as we started with another Jet bandsaw. The Jet JWBS-14DXPRO 14 inch bandsaw. The latter is big, bulky and very rigid.

Just looking at its design, it’s clear that the engineers put in a lot of effort in its construction. It features a large cast iron table that measures 15×15 inches.

Similar to the other JET model on our list, this one also features a single-phase motor. The motor produces 1 -¼ HP. This is enough power for cutting thicker pieces of wood.

When it comes to the cutting capacity, you get a cut capacity of 12 inches high. As for the width, you get a cut capacity of 13.5 inches. For making bevel cuts its blade tilts right up to 45 degrees and left up to 10 degrees.

What we liked

  • The saw has a powerful motor
  • This saw is designed for heavy-duty cutting of wood
  • The saw comes with a stand and a storage enclosure
  • Has two variable speeds for you to choose from
  • Comes with a five-year warranty

Things we didn't like

  • Does have a headlight
  • Replacement parts can be hard to find

our verdict

This jet bandsaw stays true to Jet’s attention to quality. Overall it is one of the best 14 bandsaws. It has a large tabletop that can handle larger pieces of wood. Its motor is also very powerful.

What is a Band Saw Used For?

  • Bandsaws are used to make straight cuts on wood, plastic, soft metals, and other such materials
  • Used to make relief cuts to allow for smooth curved cuts that have a sharp curvature turn
  • After making relief cuts, you can use your bandsaw to make curved cuts especially for decorative pieces
  • Bandsaws are used for resawing. This is the process of cutting thick broadsheets into smaller thin pieces
  • Bandsaws are also perfect for making veneer especially when you need to make things such as drawers
  • Due to the small size of bandsaw blades, they are also used to make small cuts

Types of bandsaws

There are many different types of bandsaws, which are categorized based on size and what they can cut. For this article, we are going to consider the types of based on size.

Horizontal bandsaws

With horizontal bandsaws, the cutting position is horizontal. As such, the blade of this type of bandsaw cuts down into the workpiece. The material being cut is usually held to a vise that is attached to the bed of the machine.

To use this kind of saw, you need to place it on the floor. These types of saws are used to cut large pieces of timber into smaller and more manageable pieces. These types of bandsaws are not ideal for making curved cuts and intricate cuts.

Vertical bandsaws

Vertical bandsaws feature two wheels above and below the tabletop. A blade runs between these two wheels vertically. The upper wheel is referred to as an idler while the one at the bottom known as a drive wheel.

To cut a piece of material, you move it from one end to the other as the blade cuts through it. Because of this, these types of band saws are perfect for making curved and intricate cuts.

With vertical bandsaws, you can accomplish more complex cuts that horizontal bandsaws cannot. It is for these reasons that vertical bandsaws are more common.

Floor standing bandsaws

These are usually large and bulky. They offer a large surface area to work with and take up a lot of space in your workshop. Furthermore, they are generally costly. However, they are the best for ripping large pieces of material.

Handheld bandsaws

These are small and offer a small cutting capacity. However, due to their size, they are easy to carry as they are lightweight. These are usually used for Jobsite tasks such as trimming excessive pieces off.

Benchtop bandsaws

These are similar to floor standing bandsaws. However, unlike floor standing models, they do not have a solid base of their own. Instead, they need to be placed on a solid flat surface that acts as their base.

Bench Top Band Saw vs Floor Standing Band Saw

As mentioned above a benchtop bandsaw doesn’t have a base of its own. A floor-standing bandsaw, on the other hand, comes with its own support. This means floor standing takes up more space than benchtop bandsaws.

So which saw is best for you? Well, it depends on your needs and the size of the workshop. If you have limited space and handle light to medium tasks, a benchtop bandsaw will be best. However, if you are professional, you will be able to do more with a floor standing bandsaw.

Best 14 inch bandsaw buying guide

When shopping for a bandsaw or any power tool, you will be bombarded with all kinds of features. Some features are important and some you can do without. It is important to know which features are of utmost importance in a bandsaw.

The motor

As with any other tool, bandsaws are powered by a motor that is electrically powered. The motor generates power to spin the blade. The more power you have, the more demanding the tasks you can handle

Generally, a motor with less than 1HP of power is suited for less demanding tasks. For medium, to heavy-duty tasks, a 1HP or more will be necessary. For demanding tasks, you will want a bandsaw with a 1.5HP motor.

The frame

The frame of a bandsaw can be made from either steel, die-cast or cast iron. Ideally, you want a cast-iron frame. Bandsaws with a cast iron frame are heavier and offer more rigidity. This translates to minimal vibrations when the saw is in use.

The base wheels

Typically, the base wheels of a bandsaw can be made of either aluminum or cast iron. Aluminum is a lighter material. As such, you do not want aluminum wheels on a large and expensive bandsaw.

Instead, go for cast iron wheels. These are more sturdy and provide improved inertia, which translates to better cutting by the blade.

Tabletop size

When cutting materials, you place them on a bandsaw’s tabletop. This needs to be large enough to accommodate the size of the material being cut. Also, the surface of the tabletop needs to be smooth.

Cast iron is the best material used in the making of bandsaw tabletops. If you typically handle large size boards go for a larger tabletop.

Dust port

The best bandsaw for woodworking will typically have a dust port. The latter helps in dust collection and to ensure your work area is free from dust particles. Some offer you the option to connect the dust port to a vacuum, which is always an added benefit.

Band Saw Safety tips

  • Wear protective gear and clothing such as goggles, or a face shield to cover your eyes and ears
  • Wear protective footwear to protect your feet
  • Ensure the blade and wheels are in good condition before use
  • Ensure the blade guard is adjusted 3mm or ⅛ inch above the top of the material being cut

Frequently Asked Questions

What can I use my bandsaw to do?

A bandsaw is mainly used to cut thicker pieces of boards into smaller and thinner pieces that can then be used. This saw can also be used to make curved and intricate cuts.

Why is a bandsaw cutting slowly?

There are two common causes of this. Number one is a blunt blade, check if your blade is dull and replace it. Also, it can be as a result of wrong installation of the blade. The blade teeth should face upside down.

How often do I need to replace my bandsaw blade

This will depend on how frequently you use the blade. Frequent use may cause the blade to become dull quicker.

Conclusion

There is a lot that bandsaws can do. But the question is do you need one. Any carpenter or woodworker worth his/her stock will need one. This versatile saw can perform many functions, making it a worthwhile investment.

Also, the best 14 inch bandsaw will be ideal for both professionals and DIYers.

Last update on 2020-08-09 / Affiliate links / Images from Amazon Product Advertising API